HelpPC 2.10 Quick Reference Utility Copyright 1991 David Jurgens

                         INT 13,0 - Reset Disk System

       AH = 00
       DL = drive number (0=A:, 1=2nd floppy, 80h=drive 0, 81h=drive 1)

       on return:
       AH = disk operation status  (see INT 13,STATUS)
       CF = 0 if successful
          = 1 if error

       - clears reset flag in controller and pulls heads to track 0
       - setting the controller reset flag causes the disk to recalibrate
         on the next disk operation
       - if bit 7 is set, the diskette drive indicated by the lower 7 bits
         will reset then the hard disk will follow; return code in AH is
         for the drive requested

Esc or Alt-X to exit int 13,0 Home/PgUp/PgDn/End ←↑↓→
Converted to HTML in 2006 by Timo Bingmann