panthema.net - Timo's Weblog

Published "The Sound of Sorting" 0.6

2013-05-23T00:50:00Z

Published "The Sound of Sorting" 0.6

Posted on 2013-05-22 23:50 by Timo at Permlink with 0 Comments. Tags: c++ university fun sorting

This post announces the publication of my demo program for integer string sorting algorithms, called "The Sound of Sorting". It both visualizes the internals of sorting algorithms, and generates sound effects from the values being compared!

The demo is implemented using the cross-platform toolkits wxWidgets and SDL, can be executed on Windows, Linux and Mac, and runs in real time.

There are also many videos of the sorting algorithm on my new YouTube channel.

See the Sound of Sorting project page for the demo program and source code, and more information about version 0.6.

Released parallel-string-sorting 0.5 including Parallel Super Scalar String Sample Sort

2013-05-08T12:47:00Z

Released parallel-string-sorting 0.5 including Parallel Super Scalar String Sample Sort

Posted on 2013-05-08 11:47 by Timo at Permlink with 0 Comments. Tags: c++ parallel-string-sorting sorting

This short post announces the first public version of our parallel string sorting project. It is a test framework and algorithm collection containing many sequential and parallel string sorting implementations.

The collection includes parallel super scalar string sample sort (pS⁵), which we developed and showed to have the highest parallel speedups on modern multi-core shared memory systems.

See the parallel-string-sorting project page for our technical report and more information about version 0.5.

Publishing STX B+ Tree 0.9 - Speed Gains over 0.8.6

2013-05-07T22:16:00Z

Publishing STX B+ Tree 0.9 - Speed Gains over 0.8.6

Posted on 2013-05-07 21:16 by Timo at Permlink with 0 Comments. Tags: stx-btree

This blog post announces the new version 0.9 of my popular STX B+ Tree library of C++ templates, speedtests and demos. Since the last release in 2011, many patches and new ideas have accumulated. Here a summary of the most prominent changes:

Changed the find_lower() function, which is central to finding keys or insertion points to not use binary search for small node sizes. The reasoning behind this change is discussed in another blog post.
Added a bulk_load() to all map and set variants to construct a B+ tree from a pre-sorted iterator range. The sorted range is first copied into leaf nodes, over which then the B+ tree inner nodes are iteratively built.
The B+ tree template source code is now published under the Boost Software License! Use it!
More minor changes are listed in the ChangeLog.

STX B+ tree version 0.9 is available from the usual project webpage.

The switch from binary search to linear scan, and all further patches and optimization call for a direct comparison of version 0.8.6 and 0.9. Because of special optimizations to the btree_set specializations, the following plots differentiate between set and maps.

This blog entry continues on the next page ...

STX B+ Tree Speed Test Measurements on Raspberry Pi (Model B)

2013-05-06T10:48:00Z

STX B+ Tree Speed Test Measurements on Raspberry Pi (Model B)

Posted on 2013-05-06 09:48 by Timo at Permlink with 0 Comments. Tags: stx-btree

The Raspberry Pi is maybe one of the most hyped embedded system projects in the last year, and I also got myself one for experiments. People are doing amazing things with this Linux-in-a-box SoC. Doubtlessly, the popularity is due to the standardized platform and a large community forming around it, which makes fixing the many small problems with Linux on ARM systems feasible. For me, the Raspberry Pi is an alternative architecture on which to test my algorithms and libraries, which exhibits somewhat different characteristics than the highly optimized desktop CPUs.

So I decided to run my STX B+ Tree speed test on the Raspberry Pi Model B, because most people use the SoC for multimedia purposes and little other memory performance data is available. The B+ tree speed test gives insight into the platform's overall memory and processing performance, and thus yields a better assessment of how useful the system is for general purpose applications (unlike multimedia decoding). Most benchmarks focus solely on floating point or integer arithmetic, which alone are very poor indicators for overall system performance. The Raspberry Pi forums say it has performance similar to a "Pentium 2 with 300 MHz", but that is for arithmetic.

This blog entry continues on the next page ...

STX B+ Tree Measuring Memory Usage with malloc_count

2013-05-05T10:44:00Z

STX B+ Tree Measuring Memory Usage with malloc_count

Posted on 2013-05-05 09:44 by Timo at Permlink with 2 Comments. Tags: stx-btree

Within the next few days, a new version of my popular STX B+ Tree library will be released. In light of this imminent release, I created a memory profile with my malloc_count tool, comparing the requirements of four different C++ maps with integer keys and values.

The test is really simple: create a map container, insert 8 Mi random integer key/value pairs, and destruct it. The memory profile shows the amount of memory over time as allocated via malloc() or new. The test encompasses the usual gcc STL's map which is a red-black tree, the older hash_map from gcc's STL extensions, the newer gcc C++ tr1::unordered_map, and of course the stx::btree_map with default configuration. As a reference, I also added the usual STL vector and deque (not map containers), to verify the plotting facilities.

To isolate heap fragmentation, the profiler fork()s separate process contexts before each run. To avoid problems with multiple equal random keys, the multimap variant of all containers is used. Here is the memory profile (also included in the STX B+ Tree tarball):

This blog entry continues on the next page ...

STX B+ Tree Revisiting Binary Search

2013-05-04T13:44:00Z

STX B+ Tree Revisiting Binary Search

Posted on 2013-05-04 12:44 by Timo at Permlink with 0 Comments. Tags: stx-btree

While developing another piece of software, I happened to require a customizable binary search implementation, which lead me to revisit the binary search function of my quite popular STX B+ Tree implementation.

The binary search is a central component in the container, both for performance and correctness, as it is used when traversing the tree in search for a key or an insertion point. It is implemented in the find_lower() (and find_upper()) functions.

In a first step, I cleaned the implementation to use an exclusive right boundary. In this binary search variant, hi points to the first element beyond the end (with the same meaning as usual end() C++ iterator). This got rid of the special case handled after the while loop. The exclusive right boundary is also a more natural implementation variant (even though most computer science textbooks contain the inclusive version).

Having thus changed the binary search, I reran the speed tests. However, to my surprise, the performance of the library decreased slightly, but consistently. See the code diff 39580c19 and resulting speed test PDF, where solid lines are after the patch and dashed ones before.

After some research, I found a good, independent study of binary search variants by Stephan Brumme. His summary is that a linear scan is more efficient than binary search, if the keys are located in only one cache line. This (of course) explained the performance decrease I measured, as my "special case" after the search was in fact a very short linear scan of two element.

This blog entry continues on the next page ...

Released disk-filltest 0.7 - Simple Tool to Detect Bad Disks by Filling with Random Data

2013-03-27T21:32:00Z

Released disk-filltest 0.7 - Simple Tool to Detect Bad Disks by Filling with Random Data

Posted on 2013-03-27 21:32 by Timo at Permlink with 0 Comments. Tags: c++ utilities

This post announces the first version of disk-filltest, a very simple tool to test for bad blocks on a disk by filling it with random data. The function of disk-filltest is simple:

Write files random-######## to the current directory until the disk is full.
Read the files again and verify the pseudo-random sequence written.
Any write or read error will be reported, either by the operating system or by checking the pseudo-random sequence.
Optionally, delete the random files after a successful run.

See the disk-filltest project page for more information about version 0.7.

Released malloc_count 0.7 - Tools for Runtime Memory Usage Analysis and Profiling

2013-03-16T22:17:00Z

Released malloc_count 0.7 - Tools for Runtime Memory Usage Analysis and Profiling

Posted on 2013-03-16 22:17 by Timo at Permlink with 1 Comments. Tags: c++ coding tricks

This post announces the first version of malloc_count, a very useful tool that I have been fine-tuning in the past months. The code library provides facilities to

measure the current and peak heap memory allocation, and
write a memory profile for plotting.
Furthermore, separate stack_count function can measure stack usage.

The code tool works by intercepting the standard malloc(), free(), etc functions. Thus no changes are necessary to the inspected source code.

See the malloc_count project page for more information about version 0.7.

Coding Tricks 101: How to Save the Assembler Code Generated by GCC

2013-01-24T18:07:00Z

Coding Tricks 101: How to Save the Assembler Code Generated by GCC

Posted on 2013-01-24 18:07 by Timo at Permlink with 1 Comments. Tags: c++ coding tricks

This is the first issue of a series of blog posts about some Linux coding tricks I have collected in the last few years.

Folklore says that compilers are among the most complex computer programs written today. They incorporate many optimization algorithms, inline functions and fold constant expressions; all without changing output, correctness or side effects of the code. If you think about it, the work gcc, llvm and other compilers do is really amazing and mostly works just great.

Sometimes, however, you want to know exactly what a compiler does with your C/C++ code. Most straight-forward questions can be answered using a debugger. However, if you want to verify whether the compiler really applies those optimizations to your program, that your intuition expects it to do, then a debugger is usually not useful, because optimized programs can look very different from the original. Some example questions are:

Is a local integer variable stored in a register and how long does it exist?
Does the compiler use special instructions for a simple copy loop?
Are special conditional instructions used for an if or switch statement?
Is a specific function inlined or called each time?

These questions can be answered definitely by investigating the compiler's output. On the Net, there are multiple "online compilers," which can visualize the assembler output of popular compilers for small pieces of code: see the "GCC Explorer" or "C/C++ to Assembly v2". However, for inspecting parts of a larger project, these tools are unusable, because the interesting pieces are embedded in much larger source files.

Luckily, gcc does not output binary machine code directly. Instead, it internally writes assembler code, which then is translated by as into binary machine code (actually, gcc creates more intermediate structures). This internal assembler code can be outputted to a file, with some annotation to make it easier to read.

This blog entry continues on the next page ...

eSAIS - Inducing Suffix and LCP Arrays in External Memory

2012-11-19T15:49:00Z

eSAIS - Inducing Suffix and LCP Arrays in External Memory

Posted on 2012-11-19 15:49 by Timo at Permlink with 2 Comments. Tags: research stringology c++

This web page accompanies our conference paper "Inducing Suffix and LCP Arrays in External Memory", which we presented at the Workshop on Algorithm Engineering and Experiments (ALENEX 2013). A PDF of the publication is available from this site as alenex13esais.pdf or from the online proceedings. The paper was joint work with my colleagues Johannes Fischer and Vitaly Osipov.

The slides to my presentation of the paper on January 7th, 2013 in New Orleans, LA, USA is also available: alenex13esais-slides.pdf . They contain little text and an example of the eSAIS algorithm with a simplified PQ.

Our implementations of eSAIS, the eSAIS-LCP variants, DC3 and DC3-LCP algorithms as described in the paper are available below under the GNU General Public License v3 (GPL).

eSAIS and DC3 with LCP version 0.5.2 (current) updated 2013-03-30
Source code archive: (includes STXXL)	eSAIS-DC3-LCP-0.5.2.tar.bz2 (975 KiB) `MD5: 18abfd0836810d7755b7fcabf09ce5dd`	Browse online
Git repositories	Suffix and LCP construction algorithms `git clone http://algohub.iti.kit.edu/algo2/eSAIS/` `cd eSAIS; git submodule init; git submodule update`
	STXXL with custom patches `git clone http://algohub.iti.kit.edu/algo2/stxxl/`
	Customized STXXL HTML documentation

The algorithm implementations requires a special version of the STXXL library, which is also listed above. For more information about compiling and testing the implementation, please refer to the README included in the source.

This blog entry continues on the next page ...